Semiconductor
Smart Futuristic Post Seal Inspection
A very useful tool that serves as quality gate for the semiconductor outgoing or pcb/SMT incoming. Inspection Machine creates the Tape Map with all the defective locations identified, and then the Rework Machine can be used as an offline tool for verifying and reworking those locations. iR2R and rR2R machines are proven and rugged machines to inspect and rework components, seal and tape quality after they have been ensealed into the carrier tapes.


AOI-LEAD PROFILE
- Tray to Tray Optical Inspection with Dual Head Handler
- 6S; 6 side inspection for surface defetcs
- Mark – Mark Inspection for Pin1, Orientation and Mark Quality and Lot confirmation
- Lead – Length, Width, Pitch, Tweeze, Coplanarity, Foot Length, Foot Angle, Standoff etc etc
- High Resolution Vision Modules to inspects all features
- Powered by High End Industrial Computer and user friendly GUI
- Communicative for upstream and downstream information passage
- Compact and Robust Machine structure

AOI - 6 Inch / 8 Inch / Wafer
- Wafer Cassette Input Output Modules
- Robotic Wafer Handling with strong End Effector
- High Resolution Optical Inspection for surface and edge defects
- Optional Infrared Imaging for internal defects detection
- High Speed X-Y-Theta table made of Linear Servo Motors
- Powered by High End Industrial Computer and user friendly GUI
- Communicative for upstream and downstream information passage
- Compact and Robust Machine structure

Humidity Controller
- NxH 801-D : Dual Channel Humidity Controller, that is powered by a local computer (PLC) to control Nitrogen Flow based on Humidity feedback for 2x chambers.
- NxH 902-S : Is a microprocessor based Single Channel Humidity Controller that controls the Nitrogen flow based on the feedback from humidity sensor for single chamber, this also has an option of wi-fi communication
- Central Monitoring : All NxH 902-S modules can communicate to a central host equipped with our Central Monitoring software to communicate both ways. Multiple Humildity Controllers can be hooked up in daisy chain fashion to infinite numbers though gateways. This can control factory wide Dry Cabinets.

PLASMA CLEANER
- Operated via PLC and touch screen for user-friendly control.
- The corrosion-resistant cavity can be customized to meet specific customer requirements.
- Featuring an imported needle valve precision flow control meter and dual process reaction gas channels.
- The unique electrode structure ensures uniform plasma distribution.

Hi-Temp. Inert Gas Oven
- Adjustable inert gas purge system including a flowmeter, two-way gas control valve.
- Corrosion-resistant, stainless steel (type 304) interior
- Baked on white powder-coated finish on the exterior for long-lasting corrosion protection
- Independent, over-temperature protection
- Circuit breaker provided for ground fault protection as standard
- Available in Single and Double Chamber

Perforating Equipment
- Running Speed: >300mm/S
- Molding Depth Accuracy: ±0.02mm, achievable on a fine grinding aluminum platform
- Cutting Precision: ±0.05mm, repeat sleeve precision ±0.1mm
- Machining Graph Radius: 0.2mm
- Cutting Methods: Complete breakage, half breakage (two-layer products with continuous bottom film and fully broken surface)

Steam Ager
- Automatic timing function to set test time and stop at the end of the experiment.
- Automatic water inlet and drainage control.
- Automatic height control of the fluid level in the box.
- Independent, over-temperature protection
- Circuit breaker provided for ground fault protection as standard
- Available in Single and Double Chamber

Smart Storage N2 Cabinets
- Controlled filling of dry air, to maintain humidity from 1% to 60% RH
- With options for N2, CO2, or any inert gas with most optimal consumptionWith options for N2, CO2, or any inert gas with most optimal consumption
- Swiss Made Sensor with smart N2 Flow Control